A thumbnail image of the Facebook logo A thumbnail image of the Instagram logo A thumbnail image of the Twitter logo A thumbnail image of the Pinterest logo A thumbnail image of the YouTube logo A thumbnail image of the LinkedIn logo
LENRD® Bass Traps

Control low frequencies inside your WhisperRoom™ with LENRD® Bass Traps. These top-of-the-line bass traps are designed to dampen low-frequency sound energy and help you attain a flatter low frequency inside your booth.

Bass traps substantial enough to control nodes have always been expensive to buy, or too intricate and time-consuming to build, but not anymore! LENRD® Bass Traps are extremely effective at smoothing out low-frequency room nodes at an affordable price.

Expansion Packages

As requirements change, some clients may find that they need a larger isolation enclosure than their original needs dictated. To accommodate this occurrence, expansion packages are available for most SE 2000 Series WhisperRooms.

Units with model numbers beginning with 60, 72, 84, or 102 consists of two or more piece ceilings/floors and can be expanded in one direction. Units with model numbers beginning with 42 or 48 have single-piece ceilings/floors and cannot be expanded. Units with model numbers beginning with 60, 84, and 102 can be expanded in 18-inch (1.5′) and 42-inch (3.5′) increments. Units with model numbers beginning with 72 can be expanded in 24 inches (2′) and 48-inch (4′) increments.

Expansion packages consist of two additional walls, 1 ceiling, 1 floor, and seam seals. These components, in addition to all components from the original, smaller, WhisperRoom unit, are used to construct the larger unit. No components purchased as part of the original unit are left unused. All 42 and 48-inch expansion packages include one ventilation set. Contact a Product Representative for pricing.

Acoustic Studio Foam (Auralex®)

Each model comes with enough Auralex® acoustical foam to cover about 1/3 of the interior. Each sheet is 2′ x 4′ and 2″ thick and attaches to the interior with Velcro®. This allows the user to customize the interior acoustics to suit their needs. The foam can easily be added to or removed from, the WhisperRoom for applications where a more “dead” or “live” environment is desired.

The entire interior surface of each WhisperRoom ceiling component and the base of the door is covered with pre-attached acoustical foam wrapped with cloth.

Foam Sheets for the ATP are pre-cut 1’ x 2’ with Velcro® attached.

Exterior Fan Silencer

Exterior ventilation fans have a 38dB noise rating. This slight noise can be eliminated by positioning each fan into an Exterior Fan Silencer (EFS). The number of EFS units needed depends on the size of the WhisperRoom™ and the number of ventilation systems required. This option may be required when a more controlled sound environment is needed in the host room.

Note: May be ordered and installed at any time.

Height Extension

The WhisperRoom™ is designed to permit installation in residences and facilities with standard ceiling heights (approximately 8′). However, when additional height is required for equipment or application-specific needs, a 10″ height extension upgrade is available.

Note: Prior to placing your order you should ensure that the host room ceiling height will permit the installation of the Height Extension. Must be specified at the initial order.