WhisperRoom sound isolation booths are available in 26 different modular sizes and two levels of sound isolation. Each booth we make is offered in the Standard (single-wall isolation) and the Enhanced (double-wall isolation). Your sound booth size, noise isolation requirements, and the preferred optional features will vary depending on your environment, location, and use.
Let’s take a detailed look at all the optional features that can be added to your WhisperRoom order. Many of these add-ons are useful for specific applications and are enjoyed by clients with similar needs. Please keep in mind that Optional Features are additional and priced separately.
This low-profile Office Desk is designed to help you maximize the workspace. Two USB outlets and two 120-volt outlets are conveniently attached to the desk so you can plug straight in.
The 30″ wide red oak desk is preattached to a backing panel with adjustable hinges. This gives you the flexibility to fold the desk down and make more space in the booth when you decide not to use it.
The desk can be installed on the inside or outside of your WhisperRoom and can be added to your initial order or afterward.
As with all WhisperRoom™ features, the optional Studio Light series provides maximum flexibility. Dual light systems, LED puck lights for general lighting, and multicolored LED lights for mood/ambiance are all incorporated into this unique design.
The Studio Lights create no noise or heat and can easily be adjusted for desired brightness. Additionally, the multicolored lights can be set to a single color or alternating colors, as well as a variety of other functions using a remote control, which is included.
The Studio Lights, in conjunction with the numerous interior acoustical foam colors now available, provide limitless possibilities. The size and quantity of the Studio Lights included with each booth are determined by the size of the WhisperRoom™.
Control low frequencies inside your WhisperRoom™ with LENRD® Bass Traps. These top-of-the-line bass traps are designed to dampen low-frequency sound energy and help you attain a flatter low frequency inside your booth.
Bass traps substantial enough to control nodes have always been expensive to buy, or too intricate and time-consuming to build, but not anymore! LENRD® Bass Traps are extremely effective at smoothing out low-frequency room nodes at an affordable price.
Fabric Acoustic Panels make it easy to incorporate acoustics into your décor. Whether it’s for home or work, you’re sure to find a solution to match your needs with Audimute.
These panels were designed with large-scale applications and high-traffic spaces in mind, ideal for schools and commercial spaces. Each panel is custom cut and wrapped in your fabric choice for a tight border without using a metal frame. This straight-edge fabric finish makes it easy to butt panels next to each other to build your acoustic design to any size.
• Hand-assembled in the USA
• Eco-friendly construction
• Excellent acoustic absorption properties – NRC .95
• Fire-safe materials – class A fire-rated (ASTM E-84)
• Thickness: 1.5″ – Size: 2′ x 4′
• Includes Velcro-backed Hang Tabs & Screws for mounting
The Multi Jack Panel is a standalone optional feature that can be installed on your WhisperRoom after it is assembled.
It is a prewired, jack-panel insert consisting of 2 USB jacks, 4 XLR jacks, and 6 – 1/4″ stereo phono jacks.
Simply thread the cables through a cable passage to reach the interior box. This feature is excellent for audiometric and studio recording applications.
The Caster Plate feature is an additional floor component with wheels to aid in the mobility of a WhisperRoom™. The Caster Plate also provides a substantial amount of downward noise control.
It adds additional mass in the downward direction and provides a 4″ air buffer below the WhisperRoom. This feature is highly recommended for applications where low-end, structurally transmitted noise is a problem.
Note: This option adds five (5) inches to the overall height of a unit and may be purchased at any time. For ease of assembly, however, it is recommended that the Caster Plate is purchased during the initial order.
An optional exterior step is now available for situations that require an optional Caster Plate. The step provides a comfortable transition when stepping up into and out of the WhisperRoom.
It is highly recommended that the step be used in conjunction with the optional Caster Plate.
The WhisperRoom™ is designed to permit installation in residences and facilities with standard ceiling heights (approximately 8′). However, when additional height is required for equipment or application-specific needs, a 10″ height extension upgrade is available.
Note: Prior to placing your order you should ensure that the host room ceiling height will permit the installation of the Height Extension. Must be specified at initial order.
The IEP floor is a 5/16″ duracoustic mat made of recycled rubber that is included in the Enhanced models or IEP upgrades. It is installed on the floor underneath the WhisperRoom™ floor and provides additional isolation.
The IEP floor can be purchased for Standard rooms and also is recommended if there is a possibility of upgrading to an Enhanced model at any point in time.
Exterior ventilation fans have a 38dB noise rating. This slight noise can be eliminated by positioning each fan into an Exterior Fan Silencer (EFS).
The number of EFS units needed depends on the size of the WhisperRoom™ and the number of ventilation systems required. This option may be required when a more controlled sound environment is needed in the host room.
Note: May be ordered and installed at any time.
Standard WhisperRoom™ Ventilation Systems are quiet. However, the airflow noise (running at 80 CFM) is still slightly audible inside a WhisperRoom™ sound isolation booth. This noise can be eliminated by the installation of a VSS. The number of VSS units needed depends on the size of the WhisperRoom™ model.
One VSS is required for each Standard Ventilation System.
Each VSS consists of two additional exhaust ducts, with hoses and adapters, linked in line between the standard exhaust duct and the remote fan unit (RFU).
Note: May be ordered at any time.
Our new HEPA filter is easily installed on any WhisperRoom. The unique design allows the ventilation to maintain airflow while blocking out unwanted particles in your booth.
HEPA filters are incredibly effective at capturing viruses, bacteria, pollen, mold, and more.
Note: Includes an additional replacement filter.
Other than size, the design is the same as that of a door window. Each glass unit consists of multiple layers of 1/4″ laminated safety glass separated by an air buffer(s). Safety glass is used because of its superior noise reduction capabilities, and its safety features; if broken, it will not shatter.
A window does not reduce the noise reduction capability of a WhisperRoom. However, it does increase the amount of interior reflective surface area. An additional cable passage plug is located at the base of each window component.
*26-Inch wide windows are only available for 42, 60, 84, and 102 Series Models.
*32-Inch wide windows are only available for 48, 72, and 96 Series Models.
Note: Must be specified at initial order.
Any WhisperRoom™ with a 5′ wall or larger can be configured with a Wide-Access Door upgrade. This upgrade is perfect for applications that require the passage of large items into and out of the WhisperRoom™. A ramp system is also available for wheelchair access.
Wide-Access Doors include a 16″ x 48″ window.
Note: Must be specified at the initial order.
The ADA Package includes the following components needed to allow easy accessibility for people with disabilities: a 32” wide door opening, a 1:12 ratio ramp, a door handle operable with a closed fist, a raised floor, our new “no threshold” door design, and each of the seven available sizes has at least a five-foot interior space for wheelchair maneuverability.
All ADA Package sizes will be available in both our single-wall (Standard) and double-wall (Enhanced) versions and will provide comparable noise reduction.
Note: The 2010 Americans with Disabilities Act standards which apply to state & local governments, public accommodations, and commercial facilities state that “the 2010 Standards apply to fixed or built-in elements of buildings, structures, site improvements, and pedestrian routes or vehicular ways located on-site.” Because the WhisperRoom is neither built-in nor a fixed element/structure, there is no technical requirement for the WhisperRoom to comply with the 2010 ADA standards.
Note: Must be specified at initial order.
We hope this article helped you learn more about the different Optional Features that can be added to your WhisperRoom. If you have any questions or if you would like to learn more about how WhisperRoom can help you achieve a desirable room for recording, producing, and mixing audio please email info@whisperroom.com.